Spherical fountain gushes water in a garden on slate stones, surrounded by green bushes and a dark wall in the background.
A silver sphere bubbles water in a rectangular pond, surrounded by wooden and gravel areas, seated chairs, and plants in a well-maintained garden area.
Metallic sphere, rotating on a calm water surface, surrounded by geometric paving stones in a modern-designed square.

Metal ball fountain -

solo or with water bowl

The fountain system AQUA GLOBE is a modular system with which individual fountains can be assembled by integrating spring balls made of Corten steel, stainless steel or even natural stone. Due to the modular design, the spheres can be combined in most cases with the water bowls known from the fountain system AQUA BOWL and/or the cubes proven in the fountain system AQUA CUBUS.

Use our prefabricated fountain series or assemble your own high-quality spring fountains from the individual elements – precisely fitting your garden planning.

Important note

The balls are welded together from individual triangular sheets. With corten steel, the welds remain visible even after rusting. And: The balls are only optically round. Tolerance in the diameter ±20 mm möglich.

A silver fountain gushes water, surrounded by plants and large stones, in a well-kept garden with lawn and shrubs.
Combination of bowl and ball made of high quality stainless steel, model TONGA
Assembly and maintenance instructions WATER
Ausschreibung Brunnensystem AQUA GLOBE
Technische Produktinfo AQUA GLOBE
Anwenderinformation WASSER
PONDO COMPACT pump series

AQUA GLOBE Ball fountains

Overview fountain systems

Spring fountain AQUA GLOBE SAMOA -

Spring ball solo on e.g. moraine gravel

The noble sphere in corten steel or stainless steel quickly attracts attention, especially when installed solo among perennials and low shrubs. In the sun, the sparkling spring water creates reflections that magically attract the eye. But even as a ball without a water outlet, the round shape has its charms and combines well with cut bushes, something boxwood balls. The water collection basin made of fiberglass reinforced plastic (GRP) is buried in the ground and the lid is visually covered with pebbles or other rocks.

The sphere for the spring fountain is available with the following diameter: ø500 mm, ø600 mm and ø750 mm. As a single ball we also offer a small ball with ø300 mm.

Spring fountain AQUA GLOBE TONGA -

Spring ball with water bowl

The spring fountain model TONGA is a combination of noble spring ball and water bowl, in which the dripping water is collected. Both are available in rust red Corten steel and shiny stainless steel. A combination of materials is not advisable, as Corten steel would rust on the more noble metal. Through a small hole in the water bowl, the water flows into the water collection vessel below and is pumped back up from there by a pond pump. Installation is provided so that the shell is aligned flush with the surface of the earth. The water bowls are available with the following diameters: ø800 mm, ø1,000 mm, ø1,200 mm, ø1,400 mm and ø2,000 mm.

Source ball solo, model SAMOA
Technique: SAMOA model
Spring ball with bowl, model TONGA
Technique: TONGA model

Accessories for spring fountain AQUA GLOBE

Cladding for water collection vessel

If the water collection vessel is not to be buried, but placed at ground level, then an optical cladding of the GRP basin with a Corten steel or stainless steel ring is recommended. This gives the fountain a whole new look.

As an accessory, we offer a ring for easy alignment of the water bowl, as well as for the source fountain AQUA BOWL. Material: plastic PE, black.

Lighting at the water outlet

By default, a warm white LED lighting is installed at the water outlet, which provides additional mood. If one of the lights is defective, it can be easily replaced. In doing so, be sure to disconnect the lamp from the circuit beforehand!

Cladding for water collection vessel
Bottom part for water bowl
Metal sphere with a central hole surrounded by screws. Lies still on a smooth, blurred surface. Rustic, rusty texture enhances the antique impression.
Detail source ball: lighting at the water outlet

Application and care instructions

For wells made of Corten steel, it is to be expected that, especially in the first few years, the water can take on a rusty brown color – until a stable barrier layer has formed on the metal surface. Fountains with water bowls made of corten steel that are not emptied at least once a week and are not allowed to dry completely on a regular basis will rust through like normal metal. Therefore, our AQUA GLOBE fountains are all designed in such a way that when the water supply is turned off, all the water drains into the buried water collection vessel. Nevertheless, the use of a timer is recommended for continuous operation, so that the fountains can dry off completely at least once a week. This also reduces the growth of algae and reduces the accumulation of dirt.

Spherical fountain bubbling at the top, placed on gravel in a walled garden with plants in the background.
SAMOA spring sphere from the AQUA GLOBE series, placed in a bed of gravel

+49 (0) 70 22 / 92 76-0 Call

Mon.-Thurs. 7:00 a.m. – 4:00 p.m. Fri. 7:00 a.m. – 3:00 p.m.

Contact form

Fill out our contact form

CONTACT